Scope
Signal and instrumentation cables with individual or collective screening.
Cable Standard
EN 50288-7 Instrumentation Cable
EN 50288-7 applies to multi-element metallic cables for analogue and digital communication and control.
Process control / Building automation
1 related product families
136 cable references
Applications
- Process control
- Building automation
- Industrial signals
Related Products
Standard Selection Data
| Standard focus | Signal and instrumentation cables with individual or collective screening. |
|---|---|
| Typical applications | Process control, Building automation, Industrial signals |
| Related product families | Instrumentation Cables |
| Common voltage references | 300/500 V, 500 V or customer-specified |
| Construction impact | Plain or tinned copper conductor; PE, XLPE, PVC or LSZH insulation; Individual and/or overall screen; Drain wire |
| Datasheet requirement | Confirm construction, rating, sheath, testing reference, marking and packing before quotation |
Cable Construction Impact
- Plain or tinned copper conductor
- PE, XLPE, PVC or LSZH insulation
- Individual and/or overall screen
- Drain wire
- PVC, PE or LSZH outer sheath
Common Model References
Cables Using This Standard
Use these cable pages to move from the standard reference to a quote-ready construction.
EN 50288-7 RE-2X(St)H Multicore Instrumentation Cable
EN 50288-7 RE-2X(St)H Multicore Instrumentation Cable is an instrumentation cable construction for multi-core signal and control circuits where pair twisting is not required, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and a protected installation profile.
View technical data →EN 50288-7 RE-2X(St)H SWA Multicore Instrumentation Cable
EN 50288-7 RE-2X(St)H SWA Multicore Instrumentation Cable is an instrumentation cable construction for multi-core signal and control circuits where pair twisting is not required, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and mechanical protection.
View technical data →EN 50288-7 RE-2X(St)H Single Pair Instrumentation Cable
EN 50288-7 RE-2X(St)H Single Pair Instrumentation Cable is an instrumentation cable construction for single analogue or digital instrument loop, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and a protected installation profile.
View technical data →EN 50288-7 RE-2X(St)H SWA Single Pair Instrumentation Cable
EN 50288-7 RE-2X(St)H SWA Single Pair Instrumentation Cable is an instrumentation cable construction for single analogue or digital instrument loop, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and mechanical protection.
View technical data →EN 50288-7 RE-2X(St)H CWB Single Pair Instrumentation Cable
EN 50288-7 RE-2X(St)H CWB Single Pair Instrumentation Cable is an instrumentation cable construction for single analogue or digital instrument loop, combining XLPE insulation, LSZH sheath, copper wire braid screen for emc protection and mechanical stability and a protected installation profile.
View technical data →EN 50288-7 RE-2X(St)H Multipair Instrumentation Cable
EN 50288-7 RE-2X(St)H Multipair Instrumentation Cable is an instrumentation cable construction for marshalling cabinets, DCS racks, junction boxes and multi-loop field instrument wiring, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and a protected installation profile.
View technical data →EN 50288-7 RE-2X(St)H SWA Multipair Instrumentation Cable
EN 50288-7 RE-2X(St)H SWA Multipair Instrumentation Cable is an instrumentation cable construction for marshalling cabinets, DCS racks, junction boxes and multi-loop field instrument wiring, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and mechanical protection.
View technical data →EN 50288-7 RE-2X(St)H CWB Multipair Instrumentation Cable
EN 50288-7 RE-2X(St)H CWB Multipair Instrumentation Cable is an instrumentation cable construction for marshalling cabinets, DCS racks, junction boxes and multi-loop field instrument wiring, combining XLPE insulation, LSZH sheath, copper wire braid screen for emc protection and mechanical stability and a protected installation profile.
View technical data →EN 50288-7 RE-2X(St)H PiMF Multipair Instrumentation Cable
EN 50288-7 RE-2X(St)H PiMF Multipair Instrumentation Cable is an instrumentation cable construction for marshalling cabinets, DCS racks, junction boxes and multi-loop field instrument wiring, combining XLPE insulation, LSZH sheath, individual pair or triple aluminium/polyester screens plus collective overall screen and a protected installation profile.
View technical data →EN 50288-7 RE-2X(St)H PiMF SWA Multipair Instrumentation Cable
EN 50288-7 RE-2X(St)H PiMF SWA Multipair Instrumentation Cable is an instrumentation cable construction for marshalling cabinets, DCS racks, junction boxes and multi-loop field instrument wiring, combining XLPE insulation, LSZH sheath, individual pair or triple aluminium/polyester screens plus collective overall screen and mechanical protection.
View technical data →EN 50288-7 RE-2X(St)H Single Triple Instrumentation Cable
EN 50288-7 RE-2X(St)H Single Triple Instrumentation Cable is an instrumentation cable construction for three-wire transmitter and RTD style instrumentation circuits, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and a protected installation profile.
View technical data →EN 50288-7 RE-2X(St)H SWA Single Triple Instrumentation Cable
EN 50288-7 RE-2X(St)H SWA Single Triple Instrumentation Cable is an instrumentation cable construction for three-wire transmitter and RTD style instrumentation circuits, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and mechanical protection.
View technical data →EN 50288-7 RE-2X(St)H Multitriple Instrumentation Cable
EN 50288-7 RE-2X(St)H Multitriple Instrumentation Cable is an instrumentation cable construction for multi-circuit three-wire instrumentation routes in process plants, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and a protected installation profile.
View technical data →EN 50288-7 RE-2X(St)H SWA Multitriple Instrumentation Cable
EN 50288-7 RE-2X(St)H SWA Multitriple Instrumentation Cable is an instrumentation cable construction for multi-circuit three-wire instrumentation routes in process plants, combining XLPE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and mechanical protection.
View technical data →EN 50288-7 RE-2X(St)H PiMF Multitriple Instrumentation Cable
EN 50288-7 RE-2X(St)H PiMF Multitriple Instrumentation Cable is an instrumentation cable construction for multi-circuit three-wire instrumentation routes in process plants, combining XLPE insulation, LSZH sheath, individual pair or triple aluminium/polyester screens plus collective overall screen and a protected installation profile.
View technical data →EN 50288-7 RE-2X(St)H PiMF SWA Multitriple Instrumentation Cable
EN 50288-7 RE-2X(St)H PiMF SWA Multitriple Instrumentation Cable is an instrumentation cable construction for multi-circuit three-wire instrumentation routes in process plants, combining XLPE insulation, LSZH sheath, individual pair or triple aluminium/polyester screens plus collective overall screen and mechanical protection.
View technical data →EN 50288-7 RE-2Y(St)H Multicore Instrumentation Cable
EN 50288-7 RE-2Y(St)H Multicore Instrumentation Cable is an instrumentation cable construction for multi-core signal and control circuits where pair twisting is not required, combining PE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and a protected installation profile.
View technical data →EN 50288-7 RE-2Y(St)H SWA Multicore Instrumentation Cable
EN 50288-7 RE-2Y(St)H SWA Multicore Instrumentation Cable is an instrumentation cable construction for multi-core signal and control circuits where pair twisting is not required, combining PE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and mechanical protection.
View technical data →EN 50288-7 RE-2Y(St)H Single Pair Instrumentation Cable
EN 50288-7 RE-2Y(St)H Single Pair Instrumentation Cable is an instrumentation cable construction for single analogue or digital instrument loop, combining PE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and a protected installation profile.
View technical data →EN 50288-7 RE-2Y(St)H SWA Single Pair Instrumentation Cable
EN 50288-7 RE-2Y(St)H SWA Single Pair Instrumentation Cable is an instrumentation cable construction for single analogue or digital instrument loop, combining PE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and mechanical protection.
View technical data →EN 50288-7 RE-2Y(St)H CWB Single Pair Instrumentation Cable
EN 50288-7 RE-2Y(St)H CWB Single Pair Instrumentation Cable is an instrumentation cable construction for single analogue or digital instrument loop, combining PE insulation, LSZH sheath, copper wire braid screen for emc protection and mechanical stability and a protected installation profile.
View technical data →EN 50288-7 RE-2Y(St)H Multipair Instrumentation Cable
EN 50288-7 RE-2Y(St)H Multipair Instrumentation Cable is an instrumentation cable construction for marshalling cabinets, DCS racks, junction boxes and multi-loop field instrument wiring, combining PE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and a protected installation profile.
View technical data →EN 50288-7 RE-2Y(St)H SWA Multipair Instrumentation Cable
EN 50288-7 RE-2Y(St)H SWA Multipair Instrumentation Cable is an instrumentation cable construction for marshalling cabinets, DCS racks, junction boxes and multi-loop field instrument wiring, combining PE insulation, LSZH sheath, overall aluminium/polyester tape screen with tinned copper drain wire and mechanical protection.
View technical data →EN 50288-7 RE-2Y(St)H CWB Multipair Instrumentation Cable
EN 50288-7 RE-2Y(St)H CWB Multipair Instrumentation Cable is an instrumentation cable construction for marshalling cabinets, DCS racks, junction boxes and multi-loop field instrument wiring, combining PE insulation, LSZH sheath, copper wire braid screen for emc protection and mechanical stability and a protected installation profile.
View technical data →Procurement Notes
When using this standard for an enquiry, confirm the full cable designation, conductor size, core count, voltage rating, sheath material, installation environment, testing requirements, cable marking and packing length. Standards help define the technical baseline, but the quote details should always match the final cable specification.
Quote Details
- Cable type and standard reference
- Conductor material, size and class
- Core count, pair count or fiber count
- Voltage rating and operating environment
- Screening, armour, fire performance and sheath material
- Cable marking, drum length, packing and delivery requirements
FAQ
| What does EN 50288-7 Instrumentation Cable affect in cable selection? | EN 50288-7 Instrumentation Cable normally affects the cable construction, application range, testing references and datasheet wording. Buyers should use the standard page together with the product page before final quotation. |
|---|---|
| Is EN 50288-7 Instrumentation Cable enough to specify a cable? | Usually no. A complete enquiry should also include conductor size, core count, voltage rating, sheath material, screening or mechanical protection, installation environment and any customer-specified approvals. |
| Which UE Cable product families relate to EN 50288-7 Instrumentation Cable? | Instrumentation Cables |